Safety Instructions; General Information - Becker Centronic Easycontrol Ec611 Montage- Und Betriebsanleitung

General information

• Please keep the instruction manual safe!
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
• Dispose of used batteries properly. Only replace the battery with one of
the same type (see Technical Data).
• Change the opening code after commissioning.
• The code button must not be programmed as a master transmitter.
Caution
• Keep people out of the system's range of travel.
• If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
•
Device contains small parts that can be swallowed.
18 - en

Safety instructions