Front Panel; Rear Panel - Pioneer BDP-100-k Bedienungsanleitung

Front panel

01
1
1  STANDBY/ON - Press to turn the
power on and off.
2 Disc tray
3 Front panel display
4 Reset button - If the power cannot be
turned off (set to standby), use a thin rod
to press this button. When the Reset button
is pressed, power to the unit is turned off
(standby status). When the  STANDBY/ON
button is pressed to turn on the power, the
unit becomes operational again.

Rear panel

1
1 LAN (10/100) terminal - Use this to
connect to a network with an always-on
broadband connection.
2 HDMI OUT terminal - Outputs video/audio
signals.
3 AUDIO OUT terminal - Outputs audio
signals.
12
2
2 3 4
3 4 5
5 Remote control sensor - Point the
remote control to this, then operate it within
approximately 7 m.The player may have
trouble capturing remote control signals if
there is a fl uorescent light nearby. If this
happens, move the player away from the
fl uorescent light.
6 OPEN/CLOSE - Press to open and
close the disc tray.
7  - Press to stop playback.
8 USB port - (page 15)
9  - Press to start playback.
4 DIGITAL OUT (OPTICAL) terminal -
Output digital audio signals when
connecting the optical digital cable.
5 AC IN - Connect the supplied power cord.
6 7 8 9
5