Coitech HF-ZJ-0101 Original Bedienungsanleitung Seite 6

e) Push the front bracket's quick-release lever (5)
up to release the aluminium track rail (6).
8. Align the transport bracket (4) over the cross-beam (11) and tighten the nuts.
9. Mount the roller supports (15) and lock them into place using the short locking knobs (17).
10. Attach the long locking knobs (18) which lock the table extension legs.
Operating instructions
Storage
The saw stand can be stored vertically in the transport position. Folding the stand:
1. Push the front bracket's quick-release lever (5) up to release the aluminium track rail (6).
2. Fold the stand together and lock the transport bracket (4) around the cross-beam (11).
Preparations
1. Unfolding the stand: Release the transport bracket (4) and unfold the undercarriage (10).
2. Fold up the rail support (12) and press the front quick release bracket (5) securely into place. Make sure that
the quick-release catch locks properly.
4
10
6
5
5 6
6
f) Mount the transport bracket (4).
4
11
4
5
12