Part Names; Dip Switch - Epson DM-D110 Bedienungsanleitung

Part Names

See Illustration A.
Note on Power-on
This product does not have a power supply switch. It automatically turns on
when the TM-T88V-DT is started.
Changing the Orientation and Angle of the Display Unit
Hold the base of the customer display with your hand and move the display or
L-shaped pole to change the direction or angle. Make sure to move them gently in
the mobile range only. Moving with force may cause damages to the display unit.
See Illustration B for the L-shaped pole model and Illustration D for the straight
pole model.

DIP Switch

The DIP switch configures the communication settings and whether a self-test is
required. See Illustration D.
CAUTION:
Turn off the TM-T88V-DT before you start setting the DIP switch. Do not allow
foreign objects to fall into the DIP switch. Setting the DIP switch with the TM-
T88V-DT power ON or foreign objects inside the DIP switch may damage the
product.
Functions of DIP Switch 1
DSW1 no.
1-1 Data reception errors
1-2 Data Length
1-3 Parity check
1-4 Parity Selection
1-5 Switching transfer speed
1-6
1-7
1-8 Self-Test execution (*1)
(*1) Executes the self-test once only when the power is turned on.
Transfer Speed Switching
SW1-5
ON
OFF
ON
OFF
ON
OFF
ON
OFF
*1 Default setting
Functions
Ignore
7 bits
With Parity
Even
See "Transfer Speed Switching."
Execute
SW1-6
ON
ON
OFF
OFF
ON
ON
OFF
OFF
DM-D110 USB Interface for TM-T88V-DT User's Manual 7
ON
Display "?"
8 bits
No Parity
Odd
Do not execute
SW1-7 Transfer Speed (bps)
ON
ON
ON
ON
OFF
OFF
OFF
OFF
English
OFF Default Setting
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
2400
4800
9600 *1
19200
38400
57600
115200
(Reserved)