Set-Up - Consort EV243 Anleitung

1. Select SET-UP and press SET.
2. Select LANGUAGE and press SET.
3. Select the desired language and press SET.
4. Select CONTRAST and press SET.
5. Adjust the contrast of the display and press SET.
6. Select ALARM and press SET.
7. Decide whether or not the output voltage should shut down at a too
low output current and press SET.
8. Select POWER FAIL and press SET.
9. Decide whether or not the instrument should proceed with the
experiment for the remaining time after a power failure and press
SET.
10. Select STAND-BY and press SET to return.
Select INFO and press SET to see general information about the
•
electrophoresis power supply.
EV2xx • www.consort.be
---- STAND-BY
↕

SET-UP

---- SET-UP
LANGUAGE
CHOOSE LANGUAGE:
↕
ENGLISH
---- SET-UP
↕
CONTRAST
---- SET-UP
↕
ALARM
CURRENT<1mA
ALARM:
---- SET-UP
POWER FAIL
POWER FAIL
DETECTION:
---- SET-UP
↕
STAND-BY
---- SET-UP
↕
INFO
Set-up
----
----
↕
----
----
↕
YES
----
↕
↕
YES
----
----
7 /31