Technical Assistance Form - Consort EV243 Anleitung

If you need assistance with a technical problem, make sure to fill (in CAPITALS !) the complete checklist (all
26 points!) and fax a copy to Consort: +32/14/429179.
1. purchase date:
2. indicate model:
5. organisation:
6. division:
7. name:
8. address:
9. postal code:
11. telephone:
13. e-mail:
14. type of connected electrophoresis unit:
15. read the preset voltage.
16. read the preset current.
17. read the preset power.
18. connect the electrophoresis unit (or a dummy resistance) and press RUN.
19. wait until one of the units blinks, then read the output voltage.
20. read the output current.
21. read the output power.
22. reset the power supply by switching on while holding SET pressed.
23. leave ALL outputs open (no load connected).
24. program the voltage to maximum.
25. press RUN and wait until the V-unit blinks, then read the output voltage.
26. if any alarm occurs, what is shown the display?
EV2xx • www.consort.be
2. purchased from:
10. city:
12. telefax:
Perform the following steps:

Technical assistance form

4. serial no:
V:
mA:
W:
yes?
V:
mA:
W:
yes?
yes?
V:
V:
31 /31