Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 4
Installation
Installation of the Remote Display (Cable: 93cm)
on Sartorius Models of the Following Series:
AC, BJ*, BL*, BP, CP, CPA, ED, GC, GK, GM*, GP, LA,
LC, LE, LP, MC, ME, RC, SC, SE, TE,
Note:
The scale must be equipped with a 25-pin data
interface (RS-232).
* Possibility of retrofitting a data interface as an
option (see also the operating instructions for the
scale). For connection to other series, please contact
your Sartorius representative.
§ Disconnect the scale from the power supply:
Unplug power cord.
§ Unplug the mains unit jack plug.
Installing the Data Cable (93cm)
§ Remove the cable (93cm) from the package supplied.
§ Plug the 25-pin plug into the interface of the scale
and secure it.
§ Plug the 9-pin plug into the interface of the scale
and secure it.
Note:
Select the appropriate menu setting
(see respective scale operating instructions).
§ Reconnect the scale to the power supply.
Werbung
