Product Description And Specifications - Bosch GLM 100 C Professional Originalbetriebsanleitung

OBJ_DOKU-36146-003.fm Page 21 Friday, February 19, 2016 9:59 AM
ensure that children do not play with
the charger.
Only charge Bosch lithium-ion

batteries with a capacity of
1.25 Ah or more (1 battery cell or
more). The battery voltage must
match the battery charging voltage
of the charger. Do not charge non-
rechargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Charge the measuring tool only with the supplied
charger.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
While reading the operating instructions, unfold the graphics
page of the product and leave it open.
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
The measuring results can be transmitted to other devices via
Bluetooth® and USB data port (not when operating the meas-
uring tool in the R60 Professional measuring rail).
Bosch Power Tools
Technical Data
Digital Laser Measure
Article number
Distance measurement
Measuring range (max.)
Measuring range (typical)
Measuring range (typical under
unfavourable conditions)
Measuring accuracy (typical)
Measuring accuracy (typical under
unfavourable conditions)
Lowest indication unit
Indirect Distance Measurement
and Vial
Measuring range
Inclination measurement
Measuring range
Measuring accuracy (typical)
Lowest indication unit
General
Operating temperature
Storage temperature
Allowable charging temperature
range
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C)
approx.
– at 10 m distance
– at 80 m distance
Setting accuracy of the laser to the
housing, approx.
– Vertical
– Horizontal
Automatic switch-off after approx.
– Laser
– Measuring tool (without measure-
ment)
Weight according to EPTA-
Procedure 01:2014
Dimensions
Degree of protection
Data transmission
Bluetooth®
Micro USB cable
– Charging voltage
– Charging current
English | 21
GLM 100 C
3 601 K72 7..
A)
100 m
B)
0.05–80 m
C)
45 m
B)
±1.5 mm
C)
±2.5 mm
0.1 mm
D)
0°–360° (4x90°)
D)
0°–360° (4x90°)
E)/G)
±0.2°
0.1°
F)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
635 nm, <1 mW
J)
6 mm
J)
48 mm
G)
±2 mm/m
G)
±10 mm/m
20 s
5 min
0.14 kg
51 x 111 x 30 mm
IP 54 (dust and splash
water protected)
Bluetooth® 4.0 (Clas-
I)
sic and Low Energy)
USB 2.0
5.0 V
500 mA
1 609 92A 25T | (19.2.16)