Installation - Chicago Pneumatic BRK 25 Sicherheits- Und Betriebsanleitung

BRK 25, 40, 55, 70, 95
Data plate
Maximum permitted hydraulic oil flow
A.
Machine type
B.
C. Maximum relief valve setting
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
Serial number (is also stamped in the valve
E.
housing).
The CE symbol means that the machine is
F.
EC-approved. See the EC declaration which is
delivered with the machine for more
information.
G. Year of manufacture.
H. Maximum nominal operating pressure
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
3392 5166 90 | Original instructions
Safety and operating instructions
Accumulator
The accumulator must only be charged with
Nitrogen.
NOTICE Only certified personnel are allowed to
work with the accumulator.
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source
used is in a compatible category. If any doubt,
consult an authorised supervisor.
Safety label

Installation

WARNING Whipping hydraulic hose
Hydraulic hoses under pressure can whip
uncontrollably if screws loosen or are loosened. A
whipping hydraulic hose can cause severe injuries.
Depressurise the hydraulic system before
►
loosening the connection of a hydraulic hose.
► Tighten the nuts on the connections of the
hydraulic hoses to the required torque.
Check that the hydraulic hose and the connections
►
are not damaged.
13