Function Selection With The Remote Control - Silvercrest SLB 450 A1 Bedienungsanleitung

Function selection with the remote control

GB
14
IMPORTANT
Risk of damage from water intrusion.
Never submerge the appliance or the remote control in water
or other fl uids. The appliance or the remote control could be
irreparably damaged.
► Using the suction cups on the back of it, attach the remote control onto the
tiles next to your bath tub.
NOTICE
► To ensure faultfree operation of the remote control
operation so that it points directly to the pump
Switch the pump
operation indicator
at the lowest level of intensity.
By once again pressing the function button
on the pump blinks red and the pump switches to the high intensity level.
By pressing the function button
the programme mode. The LED operation indicator
orange, and the appliance is now working in the massage mode. With this,
the appliance works by alternating between the low and high intensity levels.
Press the function button
The LED operation indicator
NOTICE
► The appliance switches off automatically after 20 minutes usage time.
Handling and operation
on with one press of the function button
5
on the pump blinks green, and the pump is operating
10
10
once again, the appliance switches into
10
a fourth time to switch the appliance off .
5
on the pump extinguishes.
9
, it must be held during
.
10
. The LED
the LED operation indicator
5
on the pump blinks
SLB 450 A1
5