Installing And Attaching The Tweeter - Rainbow audio GL-C6.2 Einbauanleitung

Installation Location: Door Installation (front/rear), rear installation, side view mirror area installation,
• At the selected mounting location mark the built-diameter (44 mm) and cut it out and deburr the
material carefully.
• Place tweeter (J) into the elaborate installation opening.
• Push the clamping ring (M) from the rear over the tweeter (J) and tighten the three set screws (P)
with the supplied Allen key evenly. If it is not possible to mount the tweeter with a clamping ring, the
tweeter can be fixed with hot-melt glue.
The speaker grille is removable. The speaker grille is held by the magnetism of the tweeter.
Note:
When placing the speaker grille, be careful that the dome is not pressed or damaged.
Caution: Do not touch or press the dome. Do not hurt the dome with a screwdriver or other sharp
objects.
Figure 3: Installing and Attaching the Tweeters.

Installing and Attaching the Tweeter

instrument panel installation, and rear windshield deck installation
24