User Safety Notice; Contents And Detail Of Parts - Rainbow audio GL-C6.2 Einbauanleitung

Attention: Important Operational Information. Please Read Before Installation.
• The loudspeaker may be operated only with the system-synchronized crossover and under
observance of the specified rated output power.
• Interchanging the woofer and tweeter connections will lead to immediate destruction of the tweeter.
• Beginning operation without the crossover, for example with an active crossover or non-system
crossover, will result in damage to the loudspeaker.
• The tweeter is intended for active operation without passive crossover. Disregarding this will
thermically damage the tweeter by feeding it at too-high power levels.
• When connecting the loudspeaker, crossover, and amplifier it is absolutely necessary to employ the
same polarity. Interchanging the polarity produces an unnatural sound lacking bass reproduction.
The component systems are acoustically synchronized as one unit. Supplementation through an
•
auxiliary loudspeaker or trade out with a larger woofer is not possible as this would change the
overall frequency response or impedance of the system. An overload of the crossover or a single
loudspeaker would then be unavoidable.
• The opening of the crossover for the purpose of altering the parts or function, for example bi-amping,
is considered foreign interference and grounds for termination of the warranty
• For the purpose of technical safety, the loudspeaker should only be attached with the included self-
tapping screws. We accept no liability for use of alternative methods of attachment.
Prevention of Damage from Accidents and Fire.
Our products are intended for use only by those possessing the necessary specialized knowledge. The
relevant safety regulations regarding related auto parts, the regulations on internal vehicle safety
STVZO- TÜV, as well as the regulations of the authorized vehicle manufacturers should be followed
diligently.
Woofer with mounting accessories:
Woofer 165 mm ∅ with screw terminal
2 pieces
8 pieces Sheet steel screws 4,0 x 30 V2A stainless steel
8 pieces Washers
Tweeter with mounting accessories:
2 pieces GL-T26, Volume silk dome tweeter with neodymium magnet + cable connection J
2 pieces Mounting / Fastening rings
Crossover with mounting accessroies:
2 pieces Crossovers (Tweeter / Woofer)
4 pieces Sheet steel screws 3,9 x 19 DIN 7981 black
Miscellaneous:
1 piece installation manual

User Safety Notice

Contents and Detail of Parts

M4 V2A stainless steel
19
B
G
H
X
Z