Technical Data; Germanium Line Capabilities; Positioning The Loudspeaker - Rainbow audio GL-C6.2 Einbauanleitung

System
Peak power handling
Power rating
Sensitivity
Frequency response
Impedance
Crossover
Slope
Crossover frequency
Highpass adaption
Thermal protection
Woofer
Mounting depth without / with ring 57 / 52 mm
External diameter without / with
ring
Installation diameter
Fastening diameter
Tweeter in flush mount
Mounting depth
External diameter
Fastening diameter
Rainbow Germanium Line loudspeakers are high-quality car audio systems that can be used with any
commercial amplifier. For optimal sound reproduction in the vehicle we recommend the use of a linear
amplifier with at least 50 Watts of power. The excellent efficiency of the loudspeakers makes possible an
enormous dynamic range, which is fully appreciable even at the lowest performance levels.
Auto-specific tuning and the usage of select parts in the crossovers are characteristics that define our
Germanium Line. Thermal protection as well as level adjustment within the high tone range are just as
standard as the fundamental 12 dB coupling of the individual loudspeakers.
In order to ensure the system complements your vehicle interior, we offer you the option of painting the
loudspeaker grills and rings to your desired color before installation.
Rainbow loudspeakers may be installed in your vehicle in a variety of places. In determining the
installation location the following information should be considered:
Woofers require a large area for optimum sound reproduction. Car doors with a large air cushion
between the door lining and external metal or the rear windshield deck of an auto with a large trunk are
ideal locations. In some vehicles designated speaker locations in the instrument panel, doors, rear sides,
and rear windshield deck offer the necessary minimum area.
The installation location of the tweeter must, as with the woofer, fit freely into the available designated
area or in a newly chosen area, in order that an unencumbured radiation of sound is possible. Before
installation, the mechanical installation possibilities, with consideration given to acoustical expectations,

Technical Data

GL-C6.2
150 W
80 W
90 dB 1W/1m
40 – 30.000 Hz
4 Ω
2-Way
2 x 12 dB / Octave
2.200 Hz
4 options
HALO / PTC / Wire
jumper (optional)
W 130 Germanium
137 / 156 mm
114 mm
126 mm
CAL 25 Silk VOF
22 mm
58 mm
49 mm

Germanium Line Capabilities

Positioning the Loudspeaker

20
GL-C6.2 Active
150 W
80 W
90 dB 1W/1m
40 – 30.000 Hz
4 Ω
12 – 24 dB / Octave
2.200 – 2.600 Hz
W 165 Germanium
65 / 64 mm
166 / 190 mm
143 mm
156 mm
CAL 25 Silk VOF
22 mm
58 mm
49 mm