Tips For Use - rodger bas Gebrauchsanleitung

| For each alarm to make a diff erent sound:
Press the AUTO-bu on (E). With each alarm 1 of the 8 available sounds will be heard.
| Range:
The range of the receiver and the transmi er is maximum 30 meters (100 feet) in open
air. Inside buildings, the range could be less than 30 meters (100 feet).

Tips for use:

• Always remove the transmi er immediately from a wet pant. This extends the life of
the ba ery and prevents damage to the pants.
• Make sure to remove the transmi er from the pants before laundering. The
warranty is voided if the transmi er has been in the washing-machine.
• Other transmi ers nearby (e.g.: wireless baby-monitor, garage door openers,
weather sta on, headset, etc.) can disturb the bedwe ng alarm system. Change the
frequencies of the other devices or remove them.
| Warning:
Keep suffi cient ven la on while applying AC power source.
Please ensure yourselves of your local laws, regarding ba ery disposal.
Pants
| Laundering:
For proper opera on of the pants they need to be machine washed. They will become
more absorbent. The pants can be machine washed and tumble dried. Do not wring!
Avoid fabric so ener as well as chlorinated detergents. Over me, residue may build
up on the sensor contacts inside the pant. You simply need to soak the sensor pants
for about 30 minutes in vinegar solu on (1 cup vinegar and 2 cups water).
| Pants test:
• Take a cup of lukewarm saltwater (1 teaspoon salt in 1 cup water).
• Click the transmi er on the pant.
• Make sure that the receiver is switched on and volume is adjusted (+ bu on (C)).
• Pour two teaspoons of this salty solu on on the front of the pants. This should cause
the alarm to sound and the LED (A) will start blinking red.
• The alarm can be turned off by pushing the central LED bu on (A).
4