Lehmannaudio Linear Bedienungsanleitung Seite 24

46 Linear
Functional description
EN
Rear panel
1 2 3 4 5
1 | Line input (stereo)
The RCA sockets of the line input are used to connect your signal source. This
may be e.g. a CD player, DA converter, receiver or media player. The lower socket
with the red ring stands for the right line input, the upper socket with the black
ring for the left line input.
2 | Line output (stereo)
The RCA sockets of the line output can be used to connect all devices with a line
input, for instance a power amplifier, active loudspeaker or receiver. The lower
socket with the red ring stands for the right line output, the upper socket with
the black ring for the left line output.
3 | Mains switch
Use the mains switch to turn the Linear on and off.
4 | Fuse
Fuse holder for a safety fuse (see technical specifications p. 56). Only fuses with
identical ratings must be used.
5 | Mains connection
Power inlet of the device to be used with the supplied power cord or a cable
with the same plug type. The Linear must only be operated on the mains voltage
which the unit has been designed for. This can be read on the type label on the
bottom side of the device.
Linear 47
EN