Parts Description; Before First Use - Ultratec 331400000122 Bedienungsanleitung

PARTS DESCRIPTION

1. Eject button
2. Speed control knob
3. On/O Switch
4. Handle
5. Housing
6. Stick mixer attachment
7. Chopper bowl
8. Blade
9. Beaters
10. Dough hooks
11. Chopper cover
12. Cover of the mounting hole

BEFORE FIRST USE

1. Carefully unpack your hand mixer set and remove all packaging
material.
2. Clean the various accessories of your appliance in warm soapy water,
rinse and dry thoroughly before use.
USE
NOTE: The speed control knob should be in "0" position before
using. After each use, rstly reset the speed control knob to "0"
position and then unplug the appliance.
1. Chopping
1. Attach the blade on to blade support in the jar and pour in the food
to be chopped. You can chop meat, cheese, onions, herbs, garlic,
carrots almonds, prunes etc..
2. Fix chopper cover on the chopper bowl; place the motor unit onto
the chopper cover by opening the cover of the mounting hole.
Rotate the motor unit to x completely. ATTENTION: make sure the
motor unit is xed to the bottom of the connector on the chopper
cover. Otherwise, the on/o switch will not work.
3. Plug in. Turn the speed control knob to your desired setting. Press
and hold the on/o switch to start working. During operation, hold
the motor unit with one hand and another for chopper bowl.
GB
www.ultratec.net