Connecting To Power; Inserting A Memory Card Or A Usb Flash Drive - Motorola LS1000W Bedienungsanleitung

1.2

Connecting to power

Follow the steps below to connect the photo frame to a
power outlet to turn on the power.
1. Plug one end of the AC power adapter to the power
jack on the back of the photo frame.
2. Plug the other end into a power outlet. The power of
the photo frame will be turned on.
3. Place the photo frame in landscape or portrait position
on a stable surface.
NOTE
Available plug types may vary depending on where you
purchased this photo frame.
Getting started
1.3 Inserting a memory card
or a USB flash drive
The photo frame is preloaded with some photos in the
internal memory. On the top of the photo frame, you can
also insert a memory card or a USB flash drive containing
the content you want to show on this unit.
NOTE
• After you insert a photo-loaded memory card or USB
flash drive and connect the photo frame to power, the
photo frame will automatically start to display photos in
slideshow mode.
• The memory card slot and USB port both support
hot-swap function.
• The memory card slot accepts these types of memory
cards: SD, SDHC, MMC.
• You can play audio and image files on the photo frame.
The supported audio file format is MP3 (*.mp3). The
supported image file format is JPEG (*.jpg).
• Video files are not supported on this photo frame.
9