Motorola LS1000W Bedienungsanleitung Seite 23

If you are using automatic IP network:
DHCP
a. Select for automatic connection in the
Setup
menu.
Using the menus
Select Access Point
b. The
access points that are available nearby.
Wi-Fi
c. Use the UP/VOL+ or DOWN/VOL- button to
select an access point you want to connect to,
and then press the
d. To connect to a security-enabled access point,
you will be prompted to enter the password in the
Keyboard
screen that appears. (To connect to a
security-disabled network, Step d and e are not
required.)
screen appears and shows
button.
23