Using Framechannel; Setting Up Framechannel To Work With Ls1000W - Motorola LS1000W Bedienungsanleitung

use the UP/VOL+ or DOWN/VOL- button to select the
Internal Memory USB
destination ( ,
press the button to proceed.

3.5.3.3 Using FrameChannel

NOTE
Use the supplied remote control for this operation.
3.5.3.3.1 Setting up FrameChannel to work
with LS1000W
1. Press the button on the remote control to access
FrameChannel
on your LS1000W.
2. Press the button to display the on-screen
instructions for FrameChannel setup in full screen.
32
Memory Card
or ), and then
™
3. Follow the step-by-step instructions to complete the
setup for your FrameChannel account. (If you don't
have a FrameChannel account, sign up for a new
account on www.framechannel.com)
Step 1: Go to integrated.framechannel.com, and
log into your FrameChannel account.
Step 2: Enter the Activation Code displayed on your
LS1000W in the field below, and then click
Step 3: Press the button on the remote control
FrameChannel Activation successful.
and you will see a
message on your LS1000W. Please wait while your
frame updates. A slideshow of your FrameChannel
photos will start once the update is done.
4. You can press the EXIT button to stop the slideshow,
and display photos in full screen single photo mode.
5. To quit, press the EXIT button again.
Go!
.
Using the menus