Troubleshooting - Maximum S-600 FTA Bedienungsanleitung

11 Troubleshooting

Problem
No picture Power is not connected
The power switch is not on
Screen shows DVB-S cable is not connected
No Signal Incorrect setting
No sound from No or incorrect connection
Speaker with audio cables
Mute the sound
Incorrect sound track
Only sound, No or incorrect connection
no image on the with HDMI cables
screen Radio mode is selected
Remote control The battery is exhausted
unit is not working Remote control unit is not held
in the right position to IR "eye" or
too far from it
The image stop The signal is too weak
suddenly or mosaic
Potential Reasons What to do
Connect the power
Switch on the power
Connect the DVB-S cable
Set up correct parameters
Connect the audio cables
correctly
Switch on the correct
volume control
Try another sound track
Connect the HDMI cables
correctly
Press 'TV/RADIO' key to
change to TV mode
Change the batteries
Adjust the way of holding the
remote control unit.
Strengthen the signal
ENGLISH
26