Channel Search; Satellite Settings - Maximum S-600 FTA Bedienungsanleitung

ENGLISH

6 Channel search

To access the menu, press MENU and select [Search Channel]. The Menu
provides options to adjust the Search Channel settings. Select an option and press
RIGHT/LEFT to adjust the settings. Press EXIT to exit the Menu.

6.1 Satellite settings

Configure the settings of satellites.
Satellite list: Press Up/Down to select a satellite. The settings for the relevant
satellite will be shown at the right side.
LNB Type: Press LEFT/RIGHT/OK to show the list of LNB Types which is shown
as frequencies of local oscillator. You also can enter frequency by User Single,
User Dual at bottom of the list. Default LNB type is 09750/10600 which is a
universal LNB.
LNB Power: Press LEFT/RIGHT to set the LNB power. Default is '13/18V'.
22 kHz: Press Left/Right to switch on or off the 22 kHz. Default is 'auto'.
Tone burst: Select or disable tone burst command.
DiSEqC1.0: select the right DiSEqC port (up to 4) for the correct input.
DiSEqC1.1: select the right DiSEqC port (up to 16) for the correct input.
17