Hints And Tips - KKT KOLBE KF5900IND-ED Benutzerhandbuch

Cooking guidelines
What?
Spillovers on the
touch controls

13. Hints and Tips

Problem
F5/F9
F3/F4
E1/E2
E3/E4
E5/E6
EO/FD/FC
The above measures are an excerpt of possible causes. Never make changes yourself or
dismantle the hob to prevent injury or accidents.
42
How?
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control area
with a clean damp sponge or
cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
Mögliche Ursachen
Temperature sensor
failure
Temperature sensor of
the IGBT failure
Abnormal supply
voltage
Abnormal temperature
Bad induction hob heat
radiation
Communication failure
Important!
• The cooktop may beep and
turn itself off, and the touch
controls may not function
while there is liquid on them.
Make sure you wipe the touch
control area dry before turning
the cooktop back on.
Was zu tun ist
Turn on the device and restart after the tempe-
rature returns to normal. If necessary please
contact the supplier.
Turn on the device and restart after the tempe-
rature returns to normal. If necessary please
contact the supplier.
Please inspect whether power supply is nomal.
Power on after the power supply is normal.
If necessary please contact the supplier.
Please inspect the pot. Restart hob after the
temperature returns to normal.
If necessary please contact the supplier.
Please restart after the induction hob cools
down.
If necessary please contact the supplier.
Make sure the cooktop is connected to the
power supply and that it is switched on.
Check whether there is a power outage in your
home or area.
If you've checked everything and the problem
persists, call a qualified technician.