Remington HyperFlex XR1330 Bedienungsanleitung Seite 5

ENGLISH
• Place the trimmer at desired trim line for a quick, easy, professional trim.
• To retract and switch off the trimmer, push the trimmer down and lock into
place.
E Tips for best results
Use moderate to slow stroking movements. The use of short circular motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
DO NOT press hard against the skin in order to avoid damage to the rotary
heads.
C CARE FOR YOUR SHAVER
Care for your appliance to ensure a long lasting performance. We recommend
you clean your appliance after each use. The easiest and the most hygienic way to
clean the appliance is by rinsing the appliance head after use with warm water.
, CLEANING
• Ensure the shaver is switched off.
• Hold the head and gently pull up on the ribbed area to remove the hairpocket
from the head.
• Slide the cutter locking mechanism to remove the cutters.
• Tap out excess hair shavings and use a cleaning brush if necessary.
• Close head assembly.
, CLEANING TRIMMER
• Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.
Replacement parts and accessories available to buy at www.remington.co.uk/
parts-accessories.
BATTERY REMOVAL
• Unplug the shaver.
• Run shaver until the motor stops.
• Remove the head from the shaver (Pull head up and off ).
• Using a small screwdriver, pry the 'collar' off of the top of the handle.
• Using a small screwdriver, pry the front cover from the body.
• Remove three screws located on front of shaver.
5