Quax SUNNY 54 03 53 serie Handbuch Seite 37

SUNNY
54 03 53xx
Step 3 : Use the shelf 4 of step 1, the back 5, the crossbar 7 of step 1, the sides 3L and 3R of step 2 and
twelve eccentrics D
Insert six eccentrics (D) into the drillings at the bottom of the shelf (4). Insert three eccentrics (D) into the
drillings on the left and right side of the back (5). Push the back with its dowels into the drillings and over
the connectors of the right side (3R). Tighten the eccentrics. Push the shelf (4) into the drillings and over
the connectors of the right side (3R). Tighten the eccentrics. Push the crossbar (7) with its dowels into
the drillings of the right side (3R). Push the left side (3L) with its connectors into the drillings and over the
dowels of the back, the shelf and the crossbar. Tighten the eccentrics.
Step 4 : Use the parts of step 3, the top 1 of step 2 and seven eccentrics D
Insert three eccentrics (D) into the drillings on top of the sides (3L and 3R) and one in the back (5). Push
the top (1) with its connectors into the holes and over the dowels of the sides and the back. Tighten the
eccentrics.
Commode met twee laden
Kommode mit zwei Schubladen
Commode avec deux tiroirs
Chest of two drawers
Quax Quax
First dreams First dreams
® ®
First steps First steps
37