Cleaning And Maintenance; Warranty - Ferm RSM1015 Originalbetriebsanleitung

CLEANING AND MAINTENANCE

3
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularly clean the housing with a soft cloth.
● Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● Regularly clean the saw blade to avoid
inaccuracies during use.
● Regularly lubricate the guide roller.
Replacing the saw blade (fig. B)
Worn or damaged saw blades must be replaced
immediately.
2
Only use sharp and undamaged saw
blades.
● To remove the old saw blade (11), proceed as
described in the section „Mounting and
removing the saw blade".
● To mount the new saw blade (11), proceed as
described in the section „Mounting and
removing the saw blade".
Checking and replacing the carbon brushes
(fig. A)
The carbon brushes must be checked regularly.
If the carbon brushes are worn, the machine will
start to run unevenly.
2
Only use the correct type of carbon
brushes.
● Set the auxiliary grip (8) so that the carbon
brush holders (9) can easily be reached.
● Remove the carbon brush holders (9) using a
screwdriver.
● Clean the carbon brushes.
● In case of wear, replace both carbon brushes
at the same time.
● Mount the carbon brush holders (9) using a
screwdriver.
● After mounting the new carbon brushes, let the
machine run at no load for 15 minutes.

WARRANTy

Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
7