Radio Operation - auna 10005069 Bedienungsanleitung

Adjust volume
Turn the volume knob on the device or press the corresponding buttons on the remote control.
Turn off sound
Press MUTE to turn off the sound and again to turn the sound on again. A brief press of the POWER
key will also turn the sound on again.
Display and adjust time
Press CLK or DISP and the time will be shown on the small display on the control panel. Press and hold
CLK or DISP to change the colour of the hours. Turn the volume control or press +/- on the remote to set
the hours. Press CLK or DISP briefly and the minutes change colour. Now you may set it.
EQ mode
Press the EQ button to toggle between the preset equalizers: POP, ROCK, CLAS, OFF. The sound will
change.
Turn LOUD mode on / off
Use the LOUD key to turn LOUD on or off. This improves the bass should it be too weak for you.
Removing the control unit & resetting the device
If something appears wrong on the small display, use the REL button to remove the operating element
and pull it first to the right and then out to the left. Press the RESET button to reset.
Call up settings
Touch the gear icon in the main menu to enter the setup menu. Here you can choose between: GENE-
RAL, TIME, AUDIO, VIDEO, RADIO, CALIBRATE. Touch the desired menu item.

Radio Operation

1. Select radio mode
Select this mode with MODE and then the menu to
the left will be displayed. Touch the house icon to
return to the mode menu. The radio menu can be
opened via the symbol button on the display. The
symbols have the same function as the buttons on
the device or on the remote control. In this menu,
you can adjust MUTE, EQ, TA, AF, PTY.
2. Frequency band selection
Press BAND in the radio mode and then you may
switch between FM1, FM2, FM3, AM1 and AM2.
33
www.auna.de