Salda SA-Control Schnellstartanleitung Seite 5

CHANGING THE FAN SPEED, BOOST (PRV)
Click on the fan speed button to change the fan speed, boost (PRV). Pic. 18 (page 60).
l1. Displays the active fan speed mode.
B1. Click to activate the "Stand-by" mode (if other settings allow this).
B2. Click to turn on fan speed 1.
B3. Click to turn on fan speed 2.
B4. Click to turn on fan speed 3.
B5. Click to turn on/off the "BOOST" function.
CHANGING OF MODE (MCB)
Click on the system mode button to change the mode (MCB). Pic. 19 (page 61):
l1. Current operating mode.
B1. STANDBY – AHU is stopped.
B2. BUILDING PROTECTION – maintain minimal air movement. The temperature
can be maintained depending on the settings in the MENU → SET POINTS.
B3. ECONOMY – use a decreased fan speed. The temperature can be maintained
depending on the settings in the MENU → SET POINTS.
B4. COMFORT – use normal fan speed. The temperature is maintained.
B5. MAX BOOST – The fans operate at maximum power (for a specified period).
THE MAIN SAFETY INSTRUCTIONS
• Operate the equipment strictly within the provided temperature range.
• Prevent the possibility of moisture in the equipment.
• Keep the equipment away from direct sunlight.
• Protect the equipment from mechanical damage (hits, scratches, etc.).
• Mounting and installation work can only be performed by a qualified person.
• Electric connection must be performed according to electrical schematics and the
technical requirements of the manufacturer.
• Avoid the use of foreign objects in the equipment.
UTILIZATION
Electrical and electronic waste.
• Follow local regulations regarding disposal of the equipment.
• Bring the equipment to a recycling area or container in order to minimize the effect on
the environment and public health.
• For further information on recycling, please contact the seller or the supplier.
EN
5