Selve commeo Receive Betriebsanleitung Seite 53

Troubleshooting
Problem
Motor does not work
Motor moves in the
wrong direction
The receiver does not
execute manual radio
commands
The receiver does not
execute automatic radio
commands
Cause
Electric connection
defective
Electric connection
defective
Transmitter is not pro-
grammed
Emergency signal is
active
Runtime/rotation
direction not set
Incorrect radio system
programmed
Transmitter is not pro-
grammed
Emergency signal is
active
The receiver is set to
manual mode
Solution
Check the connection
Reset the runtime/
rotation direction
Programme trans-
mitter
Await emergency
signal or eliminate
Reset the runtime/
rotation direction
Re-program all trans-
mitters of the incorrect
radio system, switch
off at the mains and
program a new trans-
mitter
Programme trans-
mitter
Await emergency
signal or eliminate
Set the receiver into
the automatic mode
by using a pro-
grammed transmitter