Description Of Parts; Assembly And Use - h.koenig MXK30 Bedienungsanleitung

- This device is not intended for use by persons with reduced capacity on the
physical, mental or sensory or lack of experience and knowledge (including
children), unless he has them was asked to monitor or if they have had instructions
on the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure they do not play with the device.
- If the power cord is damaged, it must be replaced with an after-sales service to
avoid any danger.

DESCRIPTION OF PARTS:

1. Measuring Cup
2. Lid
3. Glass Jar
4. Rubber seal
5. Blade assembly
6. Jar base
7. Motor housing
8. Power cord and plug
9. Anti-slip rubber base feet
10. Speed selector switch
11. Speed adjustment panel
12. Function buttons
13. Upper base of housing

ASSEMBLY AND USE

1. Make sure the unit is switched off and do not plug in before assembling.
2. Then fix the glass jar on to the motor base and make sure it is securely fixed to the
base.
3. Fill the glass jar with the food you wish to blend and make sure the jar does not overflow
with liquid. The maximum capacity of liquid should not exceed 1500 ml.
4. Never use the unit without putting food in the jar.
5. Place the lid securely on the glass jar.
6. Insert the measuring cup in the opening of the lid and turn counter-clockwise to lock it in
position.
HOW TO OPERATE THE BLENDER
Before using the blender, you must clean the glass jar with hot water as
1.
follows:
a) Turn the speed selector switch to position "OFF" in order to make sure the unit is turned
off.
b) Remove the lid with measuring cup
c) Fill 700-1000ML hot water into the glass jar and then switch on the appliance for about
20 seconds, switch off the and then empty the glass jar before unplug the unit.
d) Clean the measuring cup and lid with a soft damp cloth.
2. Make sure the speed selector switch is turned to the "OFF" position and then plug the
blender into mains supply.
3. Place the food you wish to blend in the glass jar. Please note the unit is equipped with two
safety devices and the blender does not operate if the glass jar is not fixed securely to the
motor base.
4. Place the lid on the glass jar and close tightly. Insert the measuring cup in the hole of the lid
and carefully turn counter-clockwise to lock it in position.