Product Description; Safety Instructions; Computer Configuration - M-Life ML0585-5 Bedienungsanleitung

Before you start to use this device, please check if there's anything missing in the package,
and contact your dealer of purchase to claim for missing items:

Product description

WPS LED
WAN LED
LAN LED
LAN Socket WAN Socket
Reset: If you need to reset the Repeater, press and hold RESET button for about 10
seconds.

Safety instructions:

1. Disconnect the device during thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure proper ventilation.
3. Keep waterproof in the storage, transportation and operating environments.

1. Computer Configuration

Below is how-to configure Windows 7. It is recommended to configure repeater when it is
connected to LAN socket with network cable (RJ45).
1.1. Computer configuration via LAN (recommended)
1. Click Start → Control Panel → Network and Internet → Network and
Sharing Center → Change adapter settings → Local connection (right
click) → Properties.
2. Double click Internet Protocol Version 4 (TCP/IPv4).
3. To set up the computer IP 192.168.10.x (x arbitrary integer between 2~252),
subnet mask of 255.255.255.0, gate of 192.168.10.1 and click OK. Back to the
last interface and click OK.
Owner's manual
WLAN LED
Power LED
WPS Button
Reset Button
Euro plug
EN
9