Technical Data - AEG PROFI-FOEN HT 5684 Bedienungsanleitung

Use
1. Turn the appliance on with the bottom switch on the
handle.
2. Select an air stream level on the handle (bottom switch):
Position 0: off
Position : gentle stream of air
Position : strong stream of air
3. Setting the Temperature level (top switch):
Position : low temperature
Position : medium temperature for gentle drying
and shaping.
Position : high temperature for rapid drying.
COOL SHOT (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the de-
sired interval length. When the button is released it returned
automatically to the initial position.
Cleaning
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the device in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.
1. Unscrew the grille in an anticlockwise direction.
2. Remove any dirt that is present.
3. If necessary, a fine brush can be used.
4. Turn the grille tight in a clockwise direction.
HT5684_AEG_IM
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the bottom switch to "0" after use and disconnect from
the mains.
Storage
• Leave the device to cool before putting it away!
• Hang the device up by the suspension eye.
• For a space-saving storage the handle can be rotated in.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.

Technical Data

Model: ...................................................................................HT 5684
Power supply: ...............................................220 - 240 V~, 50 / 60 Hz
Power consumption:..................................................1800 - 2200 W
Protection class: ................................................................................
Net weight: ............................................................ approx. 0,610 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.
English
25
14.07.16