Facom BC128A Bedienungsanleitung Seite 6

BC124A
BC128A
BC2430A
HOW TO RECHARGE A BATTERY
Initially, the charger must not be connected to the mains. Connect the clips to the battery.
- Red clip on the positive (+) terminal.
- Black clip on the negative (-) terminal.
- Then connect the charger to mains.
The charger will then operate in test mode, and the battery charge level will be shown:
The battery does not need recharging.
The battery can be recharged.
The battery must be recharged.
BOOST mode must be used.
The battery charge display will vary during charging until the maximum level is reached.
The indicator is lit steady once charging is complete.
No display:
The polarities may be reversed, the battery may be incorrectly connected, or permanently unserviceable.
REGULAR
USE
SELECTION BUTTON
REGULAR
USE
SELECTION BUTTON
BATTERY WITH ELECTROLYTE
LEVEL PLUG
SELECTION BUTTON
IF THE TEMPERATURE < -5°C
OR FOR AGM. / GEL / VLRA
MOTORCYCLE: BATTERY < 10 Ah
(BC124A only)
IF THE TEMPERATURE < -5°C
OR FOR AGM. / GEL / VLRA
POWER SUPPLY MODE
MAINTENANCE FREE OR AGM
BATTERIES
POWER SUPPLY MODE
MODO ALIMENTAÇÃO
Black clips
Red clips
6