Safety Precautions - PeakTech 6150 Bedienungsanleitung

Safety Precautions

This product complies with the requirements of the following European Community directives:
2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the danger of serious injury due to short
circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe these safety precautions are exempt from any legal
claims whatever.
* Prior to connection of the equipment to the mains outlet, check that the available mains voltage
corresponds to the voltage setting of the equipment.
* Connect the mains plug of the equipment only to a mains outlet with earth connection.
* do not place the equipment on damp or wet surfaces.
* do not subject the equipment to direct sunlight or extreme temperatures.
* do not subject the equipment to extreme humidity or dampness
* replace a defective fuse only with a fuse of the original rating. Never short circuit fuse or fuse
housing
* do not exceed the maximum permissible input rating.
* conduct measuring works only in dry clothing and in rubber shoes, i. e. on isolating mats.
* comply with the warning labels and other info on the equipment
* do not cover the ventilation slots of the cabinet to ensure that air is able to circulate freely
inside.
* do not insert metal objects into the equipment by way of the ventilation slots
* do not place water-filled containers on the equipment (danger of short-circuit in case of
knockover of the container)
* do not operate the equipment near strong magnetic fields (motors, transformer etc.)
* do not subject the equipment to shocks or strong vibrations
* keep hot soldering iron or guns away from the equipment
* allow the equipment to stabilize at room temperature before taking up measurement (important
for exact measurements)
* do not modify the equipment in any way
* do not place the equipment face-down on any table or work bench to prevent damaging the
controls at the front.
* Do not operate the meter before the cabinet has been closed and screwed safely as terminal
can carry voltage.
* The measurement instrument is not to be to operate unattended.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or
solvents.
* The meter is suitable for indoor use only.
* Do not store the meter in a place of explosive, inflammable substance.
* Opening the equipment and any service- and repair work must be performed by qualified
service personal. Repair work should be performed in the presence of a second person trained
to administer first aid, if needed.
* Power Supplies do not belong to children hands.
Cleaning the cabinet
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet. Clean only with a
damp, soft cloth and a commercially available mild household cleaner. Ensure that no water gets
inside the equipment to prevent possible shorts and damage to the equipment.
-7-