ANSMANN FM4.0 Bedienungsanleitung Seite 9

4. INSTALLING THE DISPLAY
ƒ ƒ
Attach the display on the left hand
side of your bike's handlebar and
adjust the viewing angle to suit your
height. Tighten the screw of the clamp
so that the display does not move on
the handlebar.
ƒ ƒ
The speed sensor can now be attached
to your front fork using the supplied
cable ties. The spoke magnet must
now be attached to one of your spokes
in the front wheel. Make sure that the
distance to the speed sensor is not
more than 5mm from the magnet.
5. OPERATION AVAILIBILITY
Turn on the main switch on the drive battery. The operation of the system will be
confirmed in the display:
The background lighting illuminates for two seconds and shows you the wheel
circumference set.
www.ansmann.de
9