INNOCIGS ESPION BOX Bedienungsanleitung Seite 72

INNOCIGS ESPION – ERROR MESSAGES & PROTECTIONS
Temperature Protection
If, in TC/TCR mode, the actual temperature of the coil has reached the set temperature, "PROTECT" will be shown on the
display. You can continue to use the device as usual.
Temperature Alarm
If the temperature of the device rises above 70°C, it will switch off automatically and "DEVICE TOO HOT" will appear on
the display. You can continue vaping after the device has cooled down.
Voltage Difference too high
If the voltage difference between two cells is ≥ 0.3 volt, the device will show "IMBALANCED BATTERIES." In this case,
please recharge the cells completely or replace them with fully charged batteries.
Charging Error
If no current source is detected during charging, „CHARGE ERROR" appears in the display.
Check Battery
If the battery cells have not been correctly inserted into the battery holder, the display will show "CHECK BATTERY."
USB Alarm
If the voltage of the charging adapter is ≥ 5.8 volts, the display will show "CHECK USB ADAPTER" with the USB cable
inserted.
70