Installing The Micro-Usim Card - LG -E975 Benutzerhandbuch

Installing the Micro-USIM card

Before you start exploring your new phone, you may choose to insert the Micro-USIM
card.
The eject button is a small round aperture just above the tray door. To install a new
Micro-USIM card:
1
Insert the Micro-USIM ejection tool that comes with the phone (or a thin pin) into
the eject button aperture, and push gently but firmly until the tray pops out.
2
Remove the tray and place the Micro-USIM card inside it, with the contacts out
and the angled corner to the right. There is only one possible way to fit the card
snugly into the tray.
3
Carefully reposition the tray in the slot and push it gently back into the phone.
NOTE: Make sure the gold contact area on the card is facing downwards.
Eject button aperture
21