Y-cam Outdoor HD Pro Schnellstartanleitung Seite 6

Setting up your Y-cam HD Pro
It's important your Y-cam is configured according to
your individual requirements. Once you have completed
the set up process it is advisable to test it so you are
satisfied it will do what you need.
Cable access
1
A - Unscrew the stand cap screw (anti-clockwise)
B - Twist the stand cap to remove the cables
(anti-clockwise)
Connect the camera to main router and power on
3
Use the network (Ethernet) cable supplied to connect your Y-cam camera
to a spare network port on the back of your router. Connect the power.
6
B
A
Remove the protective boot and screw
in the Wi-Fi antenna in it's place (clockwise)
Attach the Wi-Fi Antenna
2
(if using Wi-Fi)