Y-cam Outdoor HD Pro Schnellstartanleitung Seite 10

4
5
6
7
10
Having issues? Our tech support specialists are on hand to help - visit http://support.y-cam.com/
Connect the cable from the camera to the cabling
in step 2 (See picture 4)
Please make sure the power connector is pushed
in securely
Position the cable from the base of the camera
through the base of the stand and insert any
extra cable in to the stand (See picture 5)
Turn the camera and stand anti-clockwise and
place over the stand cap, and then turn clockwise
to lock in to place (See picture 6)
If you have any issues locking the stand into
place, make sure the cable from the camera
going into the base is not preventing the stand
from locking in to place.
Insert the stand cap screw and tighten it in order
to firmly secure the camera and stand to the wall
(See picture 7)
Readjust the cameras ball joint to capture the
desired view. Affix any loose cabling to the wall.