Remington HC5356 Bedienungsanleitung Seite 4

ENGLISH
C GETTING STARTED
, CHARGING YOUR APPLIANCE
• Before using your hairclipper for the first time, charge for 14-16 hours.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains. The
charging indicator will illuminate.
• Charging display light will stay on after the battery is fully charged.
• If the product is not going to be used for an extended period time (2 – 3
months), unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 14-16 hours.
, CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• When charging the LED indicator will illuminate.
• Allow 14-16 hours for a complete charge.
, USB
• Connect your USB cable to the USB port on your power source.
• Connect the USB cable to your appliance.
, CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When the cord is connected to the mains, a charging LED light is displayed
on the hairclipper.
, CAUTION
• Extended mains only use will result in the reduction of the battery life.
, WARNING
• The appliance can not be operated in corded mode while connected to a PC
via the USB port.
, CORDLESS USE
• When the unit is switched on and fully charged, the product can be used in
cordless mode for 40 minutes.
4