Removing Transport Bolts; Levelling The Washing Machine; Connecting The Water Supply - Rotel G5400CH Gebrauchsanweisung

Removing transport bolts

Please do the following to remove the bolts:
o
Loosen the 4 bolts with a spanner and then remove them.
o
Insert the plugs into the holes.
o
Keep the transport bolts safely for future use.
Warning:
o
You must remove the transport bolts from the rear before using the product.
o
You'll need the transport bolts again if you move the product, so keep them in a
safe place.

Levelling the washing machine

o
Check that the legs are firmly attached to the cabinet. If not, please turn them to
their original positions and tighten the nuts.
o
Loosen the lock nut and turn the feet until they are in firm contact with the floor.
o
Adjust the legs and lock them with a spanner, making sure the machine is steady.
Warning:
o
The lock nuts on all four feet must be screwed tightly to the housing.

Connecting the water supply

Warning:
o
To prevent leakage or water damage, follow the instructions in this chapter.
o
Do not kink, crush, modify or sever the water inlet hose.
o
For models with a hot valve, connect it to hot the water tap with the hot water
supply hose. Energy consumption will decrease automatically for some
programmes.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
100