Eurochron EUB 1000 Bedienungsanleitung Seite 3

Operating instructions
Watch winder EUB 1000
Item no. 1522145
Intended use
The watch winder is for agitating mechanical automatic watches and thereby winding them.
It must only be used with the power adapter that is included in delivery.
The power adapter is only suitable for use in common household sockets of the national grid.
Use of the watch winder and of the power adapter is only allowed in closed, indoor locations,
i.e. not outside. Contact with moisture, for example in bathrooms or the like, must be avoided.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, you may inflict damage on the product.
Furthermore, improper use involves risks such as short-circuits, fire, electric shocks, etc. Ple-
ase read the operating instructions carefully and do not discard them. If you pass the product
on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Watch winder
• Power adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
This symbol indicates specific risks associated with handling, operation or use.
The arrow symbol indicates special tips and operating instructions.
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• Please handle the product with care. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• Do not use the device in a tropical climate.
• Do not expose the device to high temperatures, dripping or sprayed water, strong
vibrations or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or close to the watch
winder.
• Never pour any liquids above or next to the product. Do not place any containers
with liquids, e.g., vases or plants, on or next to the product. Liquids may seep into
the casing and thus impair the electrical safety of the device. Furthermore, there is
a significant risk of fire or of a lethal electric shock!
• Check the device and the power adapter from time to time for damage. Do not
touch the power adapter, the watch winder or the connecting cable if they show
visible signs of damage. First, switch off the appropriate mains socket (e.g., via the
respective circuit-breaker and the RCD) and then carefully pull the power adapter
from the mains socket. Do not use the product after that and take it to a specialised
workshop instead.
• Never replace a damaged connecting cable on the power adapter. If the connec-
ting cable is damaged, the power adapter is unusable and must be disposed of.
Repairs are not permitted.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible signs of damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• In order to disconnect the watch winder completely from the mains supply, the
power adapter has to be disconnected from the mains socket.
• Please observe the additional safety instructions in the individual chapters of this
manual.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
• Never use the product immediately after moving it from a cold room into a warm
one. The condensation that forms may damage the product under certain circum-
stances. A power adapter also carries the risk of a potentially fatal electric shock!
Allow the product to reach room temperature before connecting it to the power
supply and putting it into use. In some cases, this may take several hours.
Parts and Controls
1
1 Function switch
2
2 Speed switch
3 Cover
4 Watch holder
Set-up
The device should be operated only on a stable, level surface.
Make sure you position the appliance in a safe and stable place, away from objects
that might fall on it, thereby avoiding unwanted accidents.
Avoid heavy impacts, or moving the device, especially when it is in use.
• When selecting the set-up location, take the room layout into consideration (e.g., location of
the nearest socket, etc.).
• Also keep in mind, when selecting the set-up location, the need to avoid proximity to direct
sunlight, vibration, dust, hot and cold temperatures and dampness.
• Keep the device away from powerful transformers or motors.
In view of the variety of paints and polishes used for furniture, the base of the device
may leave visible marks on the furniture on which it is placed, as a result of a chemi-
cal reaction. Therefore, do not place the device on the surface of valuable furniture
without appropriate protection.
Connecting the power adapter
Only the enclosed power adapter may be used for the mains connection.
Connect the power adapter only to a normal mains socket connected to the public
supply.
Make sure that the voltage indicated on the power adapter corresponds with the
mains voltage of your power supply. Never attempt to operate the device with any
other voltage.
Make sure that the connecting cable is not pinched or damaged by sharp edges
when making the connection.
The mains socket to which the power adapter is connected must be easily accessib-
le, so the device can be quickly isolated from the mains power supply in the event of
a fault.
• Connect the low voltage plug of the power adapter with the socket at the rear of the device.
• Plug the power adapter into a wall socket.
AUTO
650 900 1200 1500
3
4