LaserLiner ClimaCheck Bedienungsanleitung Seite 5

2
°C / °F
To set the required temperature unit, press and hold the „°C/°F"
button until the corresponding symbol appears on the display.
3
MAX / MIN
To determine the maximum or minimum temperature during a
measurement, press and hold the „MAX / MIN" button until either
„MAX" or „MIN" appear on the display. The normal measuring
mode is set when no function flashes on the display.
4
CLEAR
By pressing the CLEAR button, the MAX and MIN values are reset.
Notes
– This product is a precision instrument which must be handled
with care. Avoid impact and vibration as well as exposure to
extreme heat or cold.
– Avoid direct contact with liquids.
– Clean with a soft, damp cloth.
Technical data
Ambient temperature
Measurement range / Precision
Relative humidity
Measurement range / Precision
Power supply
Dimensions (W x H x D)
Weight (incl. battery)
Subject to technical changes without notice. 01.14
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
ClimaCheck
0 °C ... 50 °C / ±1 °C
20%rH ... 99%rH /
± 5%rH (25%rH...85%rH)
1 x 1.5V alkaline battery
(type AAA)
66 x 57 x 17 mm
47 g
05
GB