CO/Tech DZC001C-180 Bedienungsanleitung Seite 4

LXC Rotary Hammer Drill/Driver
Art.no 40-8508 Model DZC001C-180
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
General safety instructions for cordless power tools
Warning: Read all the instructions. Failure to adhere to the following instructions may
lead to electric shocks, fires and/or serious injury. The term "power tools" in the warning
text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Keep the work area clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids,
gases or dust. Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders a safe distance away from the area where
you intend to use the power tool. Distractions can cause you to lose your
concentration and control.
2) Electrical safety
a) The power tool's plug must fit correctly into the wall socket. Never modify
the plug in any way. Never use an adaptor together with earthed power tools.
Unmodified plugs and suitable wall sockets minimize the risk of electric shocks.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. There is an increased risk of receiving an electrical shock if your body
is earthed.
c) Do not expose the power tool to rain or other wet conditions. If water gets inside
a power tool it increases the risk of electric shock.
d) Do not abuse the mains lead. Never use the lead to carry the tool or pull the plug
from the wall socket. Keep the lead away from heat, oil, sharp edges and moving
parts. Damaged or tangled leads increase the risk of electric shock.
4