Cleaning The Housing; Troubleshooting; Technical Data - Pepcare 9143915 Bedienungsanleitung

NOTES:
• Manually turn the epilation cylinder to open
the tweezers; thus, hairs that are stuck can be
removed easier.
• Do not forget to reattach the protective cap (1) to the epilation head (3)
in order to protect it and to achieve a long service life of the appliance.
Cleaning the shaving head
1. Press the unlocking button (4) and remove the
shaving head from the appliance.
2. Use the included cleaning brush to remove all hairs
that have accumulated in the shaving head and
housing.
3. The shaving head is easily cleaned under running
water.
4. The appliance (housing) must be kept dry! It should
only be cleaned with the cleaning brush and wiped
with a damp cloth.

Cleaning the housing

CAUTION! Do not use abrasive cleaners in order not to scratch the surfaces.
• Wipe the housing of the appliance with a soft and slightly dampened
cloth and/or sponge;
• dry, if necessary.
Storage
• Use the storage pouch to store your epilator and keep it out of children's
reach.

34

07. Troubleshooting

DANGER!
Do not attempt to repair the appliance yourself.
• Always remove the wall power supply from the socket whenever a
fault occurs.
Fault: Please check the following:
No function Is there power coming from the socket?
Battery low?
The epilation or shaving Epilation head / Shaving head cleaned?
performance diminishes
Cutting blades / Shaving foil blunt?
If you are experiencing a fault which is not listed here, please do not hesitate
to contact our Service Centre. Repairs must only be carried out by a special-
ised company.

08. Technical Data

Article no. 9143915
Wall power supply:
Input voltage 100–240 V~, 50/60 Hz
Output voltage 3.0 V
c
Class of protection
Ambient conditions only approved for indoor use
Epilator:
Input voltage 3.0 V
Rechargeable batteries 2x 1.2 V NiMH / HR3 (AAA) 750 mAh
Class of protection
Ambient temperature 5 °C to 35 °C
In the course of product improvements we reserve the right to make techni-
cal and visual changes on the device or to its accessories.
ä , max. 1000 mA
II
ä , max. 1000mA
III

35