Antari X-510PRO Bedienungsanleitung Seite 8

Continuous operation
Press the button VOLUME
followed by the value that was set in menu item「Volume Out」 or 「NON STOP BURST」. To stop
the fog output, press the button VOLUME
Manual operation
For immediate fog output at the maximum volume of fog, keep the button MANUAL
The display indicates 「Manual Output」 . As soon as you release the button, the fog output will stop.
The manual operation will take priority over the continuous operation and the timer operation. Even if
one of these operating modes is activated, the fog machine will always emit the maximum volume of
fog when the button MANUAL
Timer operation
In the timer mode, the fog machine will automatically emit fog. The time intervals, duration and fog
volume depend on the corresponding menu settings. Press the button TIMER
timer mode. The display indicates the set time interval. The unit counts down to 0 seconds and emits
fog. To deactivate the timer mode, press the button TIMER
, to activate continuos fog output. The display indicates「Volume」
once again.`
is pressed.
8
, to activate the
again.
pressed.