Package Contents; Safety Instructions; Preparations For Installation - Renkforce 751560 Bedienungsanleitung

G Operating instructions
Dual Motion Detector
Item no. 751560
Intended use
The motion detector's integrated PIR sensor (a special dual pyro-sensor element) re-
sponds to temperature changes within the detection range, e.g. when a person enters
the detection range. Thus, the motion detector is used for monitoring entrances, stair-
cases etc.
The motion detector's design makes it especially suitable for joint use with alarm
systems. The motion detector is powered by direct current of 12 V/DC. The motion
detector's output can be used, for example for controlling the alarm input of a suitable
alarm system.
The motion detector is only intended for use in dry, closed interiors, it must not get
damp or wet.
Always observe the safety instructions included in these operating instructions.
Please read the operating instructions carefully and keep them.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc. No part of the product may
be modified or converted!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.

Package contents

• Motion detector
• Wall bracket
• Assembly material
• Operating instructions
Explanation of Symbols, Inscriptions
The lightning symbol inside a triangle is a warning to inform you of potential
risks of personal injury, such as electrical shock.
This symbol indicates specific risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.

Safety Instructions

Damage due to not following these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! In such
cases, the warranty will be null and void!
• Unauthorised conversion and/or modification of the product is not al-
lowed for safety and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children!
• The product may be installed and used only in dry indoor spaces; it must
not get damp or wet!
• If it can be assumed that safe operation is no longer possible, the device
must be turned off and precautions must be taken to ensure that it is not
used unintentionally. After this, arrange for an expert to check the prod-
uct.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (where there is flicker-
ing light, leaking smoke or a smell of burning, audible crackling noises,
or discolouration of the product or to adjacent surfaces)
- the product was stored for a longer period of time in unfavourable condi-
tions
- it was exposed to heavy loads during transport
• Do not use the product in rooms with adverse environmental conditions,
where combustible gases, vapours or dust are or may be present! There
is a risk of explosion!
• The product must not be exposed to extreme temperatures, strong vibra-
tions or heavy mechanical stress.
• Do not leave packaging material carelessly lying around, as it could be-
come a dangerous plaything for children.
• If you have any questions that are not answered in these operating in-
structions, please contact our technical department or another specialist.
Function of the motion detector
The motion detector integrated in the radio motion detector responds to temperature
changes within the detection range, e.g. if a person or an animal with a temperature
different from the background enters the detection area.
The range for detecting motion is determined by several factors:
• The motion detector's mounting height
• The temperature difference between the moving object and the background (ambi-
ent)
• The size of the object
• The distance of the object from the motion detector
• The direction and speed of movement
• Ambient temperature
To ensure optimal motion detection, the motion detector must be placed so that the
object to be detected does not approach the motion detector directly but passes the
detection area from left to right or vice versa.
The detection range can be restricted by covering the curved diffusion panel of the
motion detector with an opaque cover such as a strip of black insulating tape.
After switching on the operating voltage, it takes about 2 seconds until the PIR sensor
in the motion detector has adjusted itself to the background temperature and is able
to recognise changes in temperature within the detection area.

Preparations for installation

Open the housing by removing the individual screw at the
bottom with a cross-head screwdriver.
Then, remove the front.
Controls & Connections
1 Jumper "LED ON/OFF"
2 Jumper "MODE P/S"
3 Jumper "ALARM N.O./N.C."
4 Screw for mounting the
circuit board
5 LED
6 PIR sensor (do not touch!)
7 Tamper button ("TAMPER")
8 Screw terminals for connection
9 Imprint in housing; drill position
for cable lead-through
1
2
3
4
5
6
7
8
9