Lextronix Axis TurboDyne Series Benutzerhandbuch Seite 10

SEttING tHE tImE AND ALARm
The clock is a 12 or 24-hour clock. It is set as a 12-hour clock by
default, showing PM in the display starting at noon. To change
it to a 24-hour clock see the time setting instructions below.
The alarm turns on the radio to the last station tuned.
To set the time:
With the radio turned off, press the SEt button (the fourth
1.
button from the left, under the display) for one second.
While the hour flashes press the UP or DOWN buttons
2.
(the 3rd and 2nd button from the left, under the display)
to set the hour.
3. Press SEt again.
While the minute flashes press the UP or DOWN buttons
4.
to set the minutes.
Press SEt again.
5.
6. If you wish to change the clock mode from 12 to 24 hours
or vice versa, press the UP or DOWN buttons to change it
from the one displayed to the other.
Press SEt to finalize the time setting.
7.
To set the alarm:
With the radio turned off, press the ALARm button
1.
(to the far left side under the display) so that 'ALARM'
appears at the top of the display.
Press SEt to make the hour flash.
2.
While the hour flashes, press the UP or DOWN buttons
3.
to set the alarm hour.
Press SEt to make the minutes flash.
4.
While the minute flashes, press the UP or DOWN buttons
5.
to set the alarm minutes.
Press SEt to finalize the alarm setting.
6.
7. Press ALARm again to deactivate the alarm.
10
AXIS OWNER'S MANUAL