DJ-Tech uSolo-e Benutzerhandbuch Seite 7

CONTROLS AND FUNCTIONS
10. LCD DISPLAY – This high quality LCD display indicates all the functions, as they are occurring.
This display is viewable at several comfortable angles.
11. TRACK KNOB – Use this knob to select track or folder, depending on these two different modes
(see also No. 16) as below.
In TRACK mode, use to select a track. Turning track knob allows you to navigate between tracks.
Holding down and turning track knob will rapidly forward / back skip through the tracks by 10
tracks per click.
In FOLDER mode, turning track knob will forward / back skip between folders.
You can also switch between displaying Folder Name/FILE NAME/TITLE/ARTIST/GENRE/
BITRATE for easy searching by each pressing the TRACK button. Release the TRACK button
when you see the information you want to keep on the display. You can find more information in
basic operation paragraph.
12. SEAMLESS LOOP (See basic operation for more information.)
IN BUTTON – This function allows you to set a CUE POINT without music interruption. This
button also sets the starting point of a seamless loop.
OUT BUTTON – This button is used to set the ending point of a loop. A loop starting point is set
by pressing the IN BUTTON. Pressing the OUT BUTTON set the loop ending point. The loop will
continue to play until the OUT BUTTON is pressed once again.
RELOOP BUTTON – If a SEAMLESS LOOP has been made, but the Player is not actively in
SEAMLESS LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly
reactivate the SEAMLESS LOOP mode. To exit loop, press the OUT BUTTON. LOOP and
RELOOP will appear in the LCD DISPLAY when the RELOOP function is available.
13. CUE/ BUTTON – Pressing the button will activate the CUE PLAY function and the music will play
instantly from the last cue point.
14. PITCH ON/OFF BUTTON – This button is used to turn the PITCH SLIDER function on and off.
15. TIME BUTTON – You can select different time display by pressing the TIME button to switch
between elapsed and remaining time.
16. FOLDER BUTTON –This button has two functions:
Use to switch between FOLDER and TRACK search modes:
When the LED of FOLDER button is lit, the player is in the FOLDER search mode, otherwise it
is in TRACK search mode. **File name is the first display when selecting a track and Folder
name is the first display when selecting a folder.
Use to switch between REPEAT function on/off:
Push the FOLDER button for more than 2 second to switch between REPEAT function on/off.
REPEAT function ON: All the tracks in the current folder will play track by track until the
repeat function is deactivated.
REPEAT function OFF: All tracks in the USB device will play in the normal mode.
17. PITCH SLIDER – This slider is used to adjust the playback pitch percentage. The slider is a set
adjustment and will remain set until the pitch slider is move or the pitch function has been turned off.
This adjustment can be made with or without a music source device in the player. The pitch
adjustment will remain even if a music source device has been removed and will reflect on any
other music source device inserted into the player. That is to say, if you set a +6% pitch on one
music source device, remove the USB device and insert another, that music source device too will
have a +6% pitch. The amount of pitch being applied will be displayed in the LCD.
18. PITCH BEND BUTTONS – The speed rises while the "+button" is pressed and returns to the
original pitch when the button is released. The speed drops when the "–button" is pressed and
returns to the original pitch when the button is released. These buttons can be used to synchronize
the beats of 2 tracks.
19. PITCH RANGE SELECTOR – Press this button to switch pitch range percentages between 6%,
12% and 25%.
4
TOP PANEL