DJ-Tech uSolo-e Benutzerhandbuch Seite 11

BASIC OPERATION
STORING A HOT CUE:
You may store 3 Hot Cue Points in real time (on-the-fly) into the 3 Hot Cue Banks. Loops can also be
stored into 3 CUE BANKS.
(1) Press the MEMORY BUTTON as the right Figure. The
Memory LED will glow indicating the store memory function
has been activated. You may now press any one of the 3
CUE BANK BUTTONS to store the current playing position
into memory. After pressing one of the CUE BANK
BUTTONS, the corresponding CUE BANK Button LED will
flash. The LED on the CUE BANK BUTTON will turn on and
will remain lit indicating either a loop or cue point is stored in
memory. The MEMORY LED will turn off.
To store a loop, refer to the SEAMLESS LOOP section to
create a loop first. Then, when the loop is activated, press
MEMORY BUTTON and press one of the 3 CUE BANK
BUTTONS to store the Loop.
(2) Repeat the above steps to store up to 3 Cue Points. Once your 3 cue points have been stored you
may access them at any time.
To play the stored loops, press the desired BANK BUTTON, then both IN and OUT buttons will glow.
Press RELOOP BUTTON to play the loop. During playback the cue points will instantly start
playback from that point without any music interruption.
8