Manual Connection; E) Gallery - Intenso TAB 814 Bedienungsanleitung

Tap on the desired network and, if required, enter the appropriate WiFi key (password) to establish a
connection.
Confirm the entered password, if necessary, by touching the enter key and then select Connect. After a
short while you are connected.
Notes
a) If the device goes into standby mode, WiFi is turned off automatically. This reduces power consumption and thus automatically
leads to a longer battery life. When the device returns to active mode, the WiFi will automatically re-connect. This may take a few
seconds.
b) The list of currently searchable WiFi networks will be updated automatically.
c) If the WiFi function is enabled, the device automatically connects to an already configured network, provided it is within range.
d) If an unknown wireless network is in range, an information box will appear.

Manual connection

In order to search for an accessible WiFi network manually, please proceed as follows:
(1) Open the settings.
(2) Now open the WiFi settings and tap `Scan´.
(3) Should the WiFi network not appear in the list of available networks then select the item `Add
network´ in order to enter the network SSID, the security protocol and the possibly related password.
Tap `Save´ to confirm your entries.

e) Gallery

Tap briefly on the Gallery icon to get an overview of all existing albums and images.
Select the desired gallery, and then again the desired image by short tapping. The image will now be
displayed full screen.
Tap the photo icon to choose between different grouping options.
EN - 12